Subject | Text |
nec 50mp1 px-50xm1 power supply problem | Hello, I need some help identifying a component on my plasma power supply. It is a 5 pin sot-23 (I t |
| The zener, if connected between source and gate, is there to reduce damage caused by MOSFET failure, |
|
Picture squeezes horizontally | I got a TV that was said to have problems but after plugging it in and turning it on it was fine. I |
| Please note that simple multimeter with a capacitance range often are useless for measuring large el |
| [quote:6757b2afc1="Nikko485"]Yop !
I've tried to power it up after brain storming in retrieve the b |
RCA Home Theatre Model P52812BL does not turn on | [b:0754ff1ff1]My 52" RCA TV was purchased on 2000 and it just now kicked the bucket. It would n |
83 ramcharger need help trouble shooting | I Just got an 83 ramcharger for free from a friend who moved out of state and the battery blew up on |
11AK19PRO Dead - LED is dead and it sounds intermitently | Hi
I need some help with a TV which has a 11AK19PRO Chassis.
First I had problems with Narrow pi |
Panasonic breadmachine SD207 | SD207 the motor is not running. The motor is OK and a new triac does not solve the problen (Origiona |
| [quote:ad9540614a="Mad Professor"]I have been away from home for a few weeks.
I've been looking |
Re: Barina 2003/4 model | [quote:448888e776="DBLOUD"]Hi there,
I have a Holden (opel) Barina sxi end of 2003/4 model.
I |
Need Schematic For Sola SPS 800A | Gang:
I've been looking everywhere and can't find a schematic for my:
SOLA Model SPS 800A
P/N |
TV Philips 32pw8506, entering SDM via pins Not working! | Hi there.
I played around with the settings in the service alignment menu(SAM), and now unfortuna |
| Well, sadly the crackling noise is also in the headphones. SO now I need to go further back in the a |
philips fl 1.17 | Hello my problem is that i have a vertikal white line like noise or something in the right side of |
| I suppose that this transistor is located on the primary side of the power supply and that you are m |
| Also, see if it still thumps if you turn the gain all the way down before powering off. If not, the |
|
swapping VGA cable | Although vga cable seems all the same at one end (15 pins) it is quite a different story at the othe |
Goodmans GHD1621F2 GHD2521F2 PVR Hard Drive Fault (Ticking) | Just fixed my uncle's GHD1621F2. Symptoms were that it 'couldn't find' the hard drive - the system |
IBM Monitor 6551-63N | I am experiencing a problem where the monitor appears to be either momentarily turning itself off an |
| I suppose that it is a single phase transformer ? Then, one possible way that it has delivered a too |
Int. Philips | Hello,
Below find my only database entries for the fault you describe.
1/ TV set starts up and |
Denon UD-M3 CD tray eject problem | Great stuff. Another one fixed after not working for well over 4 years. Used a 20mm panel fuseholder |
which whole house surge protector to get? | There are numerous whole house surge protectors for various price ranges. There are many electric an |
PANASONIC TX-2. need HELP!!! | I need The Service Manual for Panasonic TX-2. The TV set is dead and thereis an low frequency noise |
| Ok - job done!
Thanks very much for putting me onto that website vtech, excellent information.
T |
NEC PXT-42S11S " Heat Run" ? | I need help desperatley as NEC don't feel the need to provide it. :x
I recently purchased the N |
| Quick look at the diagram reveals a simple 2 input "AND" Gate switch operation.
[URL=http |
| [quote:963e7b322d="minnie"]Leviton has no excuse. The switch works but the variable portion doesn't |
| I call dish network dish dish no work. S video bypasses the tuner. There is no luminance correction. |